Ball Valves

Floating Ball Valves View All

Floating ball valve refers to that the ball is suspended in the flowing medium held in position by the compression of two elastomeric sets against it. The shaft is connected to a lot on the top which allow the ball to be driven travel through 90 degrees. The shaft allows for a certain amount of lateral movement of the ball, generated from the upstream pressure against the ball. The small lateral movement produces load on the ball, pressing it against the downstream seat. The ball valve is designed to be shut off bi-directionally. Read more about Floating Ball Valves

Trunnion Mounted Ball Valves View All

The ball is mounted on trunnion supported in body bearings above or below the ball. The sealing is realized by spring loaded piston type seat which shut off flow when line pressure is exerted on the upstream seat. The design provides automatic relief of cavity overpressure. Trunnion mounted ball valve is available in seizes above "2” and is generally used for higher pressure. Trunnion mounted ball valve can be closed quickly and thus there is a danger of water hammer. Trunnion ball valve is widely applied in chemical engineering, petroleum, gas, metallurgy and the long-distance pipe containing hydrogen sulfide, impurities and media having strong corrosion. Read more about Trunnion Mounted Ball Valves

Fully Welded Ball Valves View All

Fully welded ball valve is one of the most commonly used valves in the petroleum industry. The distinctive design of the valve increases strength while reduces weight as well as increases resistance to pressure and stress on the pipeline. The ball valve combines the strength of forged components with a lightweight and compact spherical design. The compact, spherical design also eliminates body flanges, reducing overall size and potential leak paths further. Read more about Fully Welded Ball Valves

Multi Way Ball Valves View All

Multi-way ball valve also called as multiport ball valve offers superior performance and reliability required to optimize manual and automation process performance. The ball valve offers solutions to mixing and diverting with various available flow patterns and end configurations. It can be maintained in-line, leaving the end pieces intact. The direct mount design makes automation easier and maintains a lower profile. The valve features the pyramidal stem design is so effective.Read more about Multi Way Ball Valves